Product Overview
Large flow filter element internal pressure filter, one end opening, filter fluid flow mode from inside to outside.The large diameter design of the filter element increases the effective filtration area, which can greatly reduce the number of the filter element and reduce the shell size.Filtering a long life in applications can reduce investment and labor costs.
Product characteristics
The filtration direction from inside to outside ensures that all impurities are trapped inside the filter element.
Gradient aperture structure, high pollution capacity, reduce labor and operating costs.
You can use smaller filter housing to reduce investment cost and save land area.
Replacement is faster, easy and safe, with O-ring design to ensure filter reliability.
Hot melt adhesive material prevents particle release and unloading.
Technical Specification
| Filter Element Size | Outer Diameter: 6″ (152 mm) Length: 20″ (535 mm), 40″ (1024 mm), 60″ (1524 mm) |
| Filter Material | Pleated Glass Fiber, Pleated Polypropylene (PP), Melt-Blown Polypropylene (PP) |
| Support / Guide Layer | Polypropylene (PP) |
| End Cap Material | Glass Fiber Reinforced Polypropylene |
| Seal Ring Material | EPDM (Ethylene Propylene Rubber), Nitrile Rubber (NBR) |
| Filtration Accuracy | 1 μm, 3 μm, 5 μm, 10 μm, 20 μm, 50 μm, 75 μm, 100 μm |
| Maximum Operating Temperature | Pleated Glass Fiber: 121°CPleated Polypropylene (PP): 82°CMelt-Blown Polypropylene (PP): 65°C |
| Maximum Differential Pressure | 3.4 bar |
| Recommended Replacement Differential Pressure | 2.4 bar |
| Recommended Maximum Flow Rate | 20″ Filter Element: 450 LPM 40″ Filter Element: 800 LPM 60″ Filter Element: 1150 LPM |
Application Area
Large reverse osmosis pre-processing filtration.
Electronic industry high-pure water front filtration.
Petrochemical industry amine liquid filtration, oil field back to water injection filtration.
Power, coal chemical industry security filtration, seawater desalination pretreatment.
